Advantech 8G ports Industrial Managed Redundant Gigabit Ethernet Switch User Manual

 

EKI-7758F User Manual                                                 40 

 

 
 

 

User can configure the IP Settings and DHCP client function here. 
 

•  DHCP Client: To enable or disable the DHCP client function. When DHCP client function is enabling, 
    the industrial switch will be assigned the IP address from the network DHCP server. The default IP 

address will be replace by the DHCP server assigned IP address. After user click “Apply” button, a 
popup dialog show up. It is to inform the user that when the DHCP client is enabling, the current IP will 
lose and user should find the new IP on the DHCP server. 

•  IP Address: Assign the IP address that the network is using. If DHCP client function is enabling, and 
    then user doesn’t need to assign the IP address. And, the network DHCP server will assign the IP 

address for the industrial switch and displays in this column. The default IP is 192.168.1.1. 

•  Subnet Mask: Assign the subnet mask of the IP address. If DHCP client function is enabling, and then 
    user does not need to assign the subnet mask. 

•  Gateway: Assign the network gateway for the industrial switch. The default gateway is 192.168.1.254. 

•  DNS1: Assign the primary DNS IP address. 

•  DNS2: Assign the secondary DNS IP address. 
•  And then, click  Apply