Vulcan-Hart BVP42FP32(F,L)N-1 User Manual

Page of 40
Page 3
19400-3-0406
Before enclosing the vent pipe assembly, operate the appliance to ensure it is venting properly.
•  If  this  appliance  is  installed  directly  on  carpeting, 
tile or other combustible material other than wood 
flooring the appliance shall be installed on a metal or 
wood panel extending the full width and depth of the 
appliance. 
  The base referred to above does not mean the fireproof 
base as used on wood stoves. The protection is for rugs 
that are extremely thick and light colored tile.
•  Children and adults should be alerted to the hazards 
of high surface temperatures and should stay away 
to avoid burns or clothing ignition.
•  Young children should be carefully supervised when 
they are in the same room as the appliance.
•  Clothing or other flammable material should not be 
placed on or near the appliance.
•  Adequate accessibility clearances for servicing and 
proper operation.
•  This appliance must not share or be connected to a 
flue serving a separate solid-fuel burning appliance.
•  Keep  the  area  around  your  appliance  clear  of 
combustible materials, gasoline and other flammable 
vapor and liquids. 
•  Under  no  circumstances  should  any  solid  fuels 
(wood, coal, paper or cardboard etc.) be used in this  
appliance.
•  The flow of combustion and ventilation air must not 
be obstructed in any way.
•  Due to high temperatures the appliance should be 
located out of traffic and away from furniture and 
draperies.
•  Any part removed for servicing the appliance must 
be replaced prior to operating the appliance. Work 
should be done by a qualified service person.
•  Keep burner and control compartment clean. 
•  Vent cap is hot while fireplace is in operation.
•  Installation  and  repair  should  be  done  by  a 
QUALIFIED SERVICE PERSON. The appliance 
should be inspected before use and at least annually 
by  a  qualified  service  person.  More  frequent 
cleaning may be required due to excessive lint from 
carpeting, bedding materials, etc. It is imperative 
that control compartments, burners and circulating 
air passageways of the appliance be kept clean.
•  DO NOT put anything around the fireplace that 
will obstruct the flow of ventilation air.
•  Clearance  in  accordance  with  local  installation 
codes and the requirements of the gas supplier.
•  DO keep the appliance area clear and free from 
combustible material, gasoline and other flammable 
vapors and liquids.
•  DO  examine  venting  system  periodically  and 
replace damaged parts.
•  DO  make  a  periodic  visual  check  of  pilot  and 
burners. Clean and replace damaged parts.
•  DO NOT use this fireplace if any part has been 
under water. Immediately call a qualified service 
technician  to  inspect  the  heater  and  to  replace 
any part of the control system and any gas control 
which has been under water.
•  Any safety screen or guard removed for servicing 
an appliance must be replaced prior to operating 
the appliance.
IMPORTANT SAFETY INFORMATION