Arkon Winshield Leaflet

Consumer Hotline: 
(USA)    (800) 841-0884
(INT'L)   (626) 254-9005
 Mon-Fri. 9am-5pm, PST

Arcadia, CA 91006 USA

Made in Taiwan

© Copyright 2007 Arkon Resources, Inc.

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone. Arkon Resources, Inc. assumes no responsibility 
of liability for injury or death as a result of car crashes and/or air bag 
deployment.

Arkon Resources, Inc. is not responsible for any damages caused to 
your car, your device, or yourself due to the installation of this 
mounting solution.

1. Locate a safe, flat surface on the dash 
or console to mount the pedestal. 
Clean the dash with the alcohol pad 
provided. Let the dash surface dry 
before applying the adhesive disc (G).

2. Push the pedestal suction cup firmly 
to the disc (G). Flip the lever (H) down 
to secure the pedestal's suction cup to 
the top of the adhesive disc.

Windshield Installation  

CM014-KST-2

CC003-BBP

AP036

2. Push the pedestal suction cup (A) firmly to the windshield. 
Flip the lever (B) down to secure the suction cup. 

 

Pedestal Adjustment Instructions 

1. Adjust the angle of the arm by loosening the adjustment knob (C). 
Adjust the angle and rotation of the pedestal (E) head by loosening the 
swivel-tightening knob (D ).

2. Attach the cradle (F) to the pedestal head (E) by sliding the Dual T-tabs 
on the head of the pedestal into the dual T-slots on the back of the cradle.

1.  Choose the best location on vehicle to place the mount. Do not place 
mount in or near an air bag deployment zone or where it will obstruct 
view of the road.

360   Swivel