Panasonic KX-TG2583ALS User Manual

If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the Call Waiting Caller ID Feature may not be used (p. 54).
Your phone comes from the factory set to “A”. 
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.

1

Press 

(FUNCTION/EXIT/CH)

.

2

Press 

(Å)

or 

(Ä)

repeatedly until the arrow

points to “Program”.

3

Press 

FWD/EDIT (É)

(Yes key).

4

Press 

(Å)

or 

(Ä)

repeatedly until the arrow

points to “Set line mode”.

5

Press 

FWD/EDIT (É)

(Yes key).

6

Press 

(Å)

or 

(Ä)

to select “B” or “A”.

7

Press 

FWD/EDIT (É)

(Save key).

•A beep sounds.

•To return to the standby mode, press 

(FUNCTION/EXIT/CH).

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If the handset has lost communication with the base unit, 3 beeps sound and “No

link to base. Place on cradle and try again.

” is displayed.

H

Set line mode
Talk switching

GF

H

=Yes

Line mode

:A

GF

H

=Save

Line mode

:B

H

Save directory
Ringer volume

GF

H

=Yes

H

Program

GF

H

=Yes

H

Save DIRECT#
Set recall time

GF

H

=Yes

Line mode

:B

GF

H

=Save