JVC SR- DVM600U User Manual

Filename [DVM600US_12Subsidiary.fm]

Masterpage:Left0

Page 58Monday, 25 September 2006  13:54

Various modes of this unit are categorized into menus nested in 2 
levels shown in the following table. To change the settings of these 
modes, find the desired mode in the menu (for details on each 
menu, see pages 58 through 60), then follow the procedure below.

●

The procedure below shows how to set the desired option of the 
AJUMP TIMEB mode as an example.

Press HDD or DVD so that the HDD or DVD lamp lights up on 
the unit.

Press SET UP to access the Main Menu screen.

Press selection keys to select 

AFUNCTION SET UPB, then 

press 

G.

Press selection keys to select 
AREC/PLAY SET UPB, then 
press 

G.

Press selection keys to select 
AJUMP TIMEB, then press 
ENTER.

Press selection keys to select 
the desired option, then press 
ENTER.

Press SET UP to complete the setting.

8

 

^

 DOLBY DIGITAL/PCM / 

 / PCM ONLY

Set to the appropriate mode according to the type of the device 
connected to [DIGITAL AUDIO OUTPUT] connector.

DOLBY DIGITAL/PCM

:

Select this when you connect the digital input connector of a 
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital 
Decoder.

:

Select this when you connect the digital input connector of an 
amplifier with a built-in DTS, Dolby Digital, or MPEG 
multichannel decoder.

PCM ONLY

:

Select this when you connect the linear PCM digital input of 
other audio equipment (amplifier, MD or DAT deck, etc.).

●

This setting also functions when HDD is active.

●

If you watch or play back a title which contains multiple audio 
languages, select 

APCM ONLYB in advance and choose main or 

sub audio with AUDIO.

8

 

^ 

 / DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the 
connected A/V equipment. This function takes effect when a 
DVD VIDEO disc is played back.

:

Select this when listening to conventional two-channel stereo 
audio with the unit’s [AUDIO OUTPUT] connectors connected 
to a stereo amplifier/receiver or TV set, or in case you want to 
record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND

:

Select this when listening to multichannel surround audio with 
the unit’s [AUDIO OUTPUT] connectors connected to an 
amplifier/receiver with a built-in surround decoder or a surround 
decoder.

8

 

^ 

 / 

WIDE RANGE / TV MODE

The dynamic range (the difference between the loudest sound and 
the quietest one) can be compressed during playback of a program 
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in 
Dolby Digital format is played back at low or middle volume.

:

Normally select this setting to activate this function.

WIDE RANGE

:

Select this to deactivate this function when you enjoy wide 
dynamic range program.

TV MODE

:

Select this when you hear the sound through the TV’s 
speaker(s).

●

This function has no effect on programs other than those 
recorded in Dolby Digital format.

●

This function does not work when Simulated Surround Effect is 
activated. (

●

The effect of 

ANORMALB and AWIDE RANGEB may not be 

different depending on discs.

8

 

^ 

 / LOW

You can lower the output level of analog audio to accommodate the 
unit to the connected A/V equipment.

:

Normally select this setting.

LOW

:

The output level of analog audio is lowered.

●

Turn on the unit.

●

Turn on the TV and select the AV mode.

●

Slide the TV/DVD switch to DVD.

LANGUAGE SET (

AUDIO OUTPUT (See right column)
DISC PLAY SET UP (

HDD SET UP (

DVD SET UP (

REC/PLAY SET UP (

DISPLAY SET (

MENU BACKGROUND (

FGDE

DVD

TV

ENTER

SELECT

SET UP

EXIT

DVD VIDEO SET UP

XP MODE REC AUDIO

HDD/DVD SET UP

FUNCTION SET UP

INITIAL SET UP

REC/PLAY SET UP

DISPLAY SET

JUMP TIME

VIDEO IN/OUT

DOLBY DIGITAL

15 MIN

SELECT WITH @ 

PRESS [SET UP] TO EXIT

THEN PRESS [ENTER]

DVM600US_00.book  Page 58  Monday, September 25, 2006  1:54 PM