Speco Technologies DVR-PC8 Series User Manual

 
 

 

 

Motion detection area can be selected on the motion detection area screen 
after the checkmark on the “All Ranges” selection is turned off. 
 
1.  Click the left mouse once: One field box is created. 
2.  Click left mouse and drag: Field box is created following the direction of 

the drag. 

3.  Click the left mouse twice: The whole area in the chosen box is created. 
4.  Click the right mouse once: Disable one of the selected boxes. 
5.  Click the right mouse twice: Disable the entire selected box. 
 
When the selection is made, any movements in the selected range will be 
recorded. 
 

Recording is not supported if you don’t configure the motion 
detection area after disable “All Ranges” setting. 

 
Cover Entries Area 
When all ranges are selected, any motion detected in the entire screen is 
recorded. The all ranges are set as default. 

 
 

 

 

Use the slide bar to control the setting value for clearer recording image. 
(Recommended recording picture quality: 100) 
 

 
 

 

 

Motion sensitivity of the images can be adjusted by using the slide selection 
bar. We recommend users to record smaller movements with higher 
sensitivity level. (Default: 80) 
 

DVR is always in continuous recording. 

When the camera shape button (

) is pressed, the images will be 

recorded whether there is change in the image or not. Thus, if it is on, the 
Motion Detection Sensitivity will not be used. 

 
 

 

 

When motion is detected, Recording will be proceeded in the period of given 
time set up