Panasonic KX-TG2257S User Manual

If no commands are entered after you press

(FLASH/CALL!WAIT/PLAYBACK)

, the unit will start the following voice

menu.

“Press 4 to play back new messages. Press 5 to play back all messages.”

•You can enter direct commands even if the voice menu has started.

You can operate your answering system
with the handset. 
The announcements and recorded
messages can only be heard with the
handset.

Press 

(FLASH/CALL!WAIT/PLAYBACK)

.

•The number of new messages is heard.

•“Remote operation” is displayed on the handset.

Enter the desired direct commands (p. 73).

•If you do not enter a command, the voice menu will start (see below).

•After the voice menu, all message playback will start.

To end remote operation, press 

(FLASH/CALL!WAIT/PLAYBACK) or

(OFF)

.

•The messages are saved.

•The unit will announce the remaining recording time after playback, if it is less

than 5 minutes.

•If the unit starts to ring during the remote operation, press 

or 

to

answer the call. The remote operation is ended.

•If you hear “Memory full” after playback, erase some, or all, of the messages

(p. 73).

To listen to the announcements and messages from
the speaker, press 

while they are heard.

•To switch back to the receiver, press 

.

(FLASH/CALLÒWAIT/PLAYBACK)

(OFF)