Panasonic KX-TG2257S User Manual

“No link to base
Place on cradle and

try again.

” is displayed

and an alarm tone sounds.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

The handset and/or the base
unit does not ring.

The handset display is
blank.

You cannot store a name
and phone number in the
directory.

While programming or
searching, the unit starts to
ring and stops the program/
search.

You cannot make a call with
the handset.

•You are too far from the base unit. Move

closer and try again.

•Place the handset on the base unit and

try again.

•Plug in the AC adaptor.

•Raise the base unit antenna.
•Locate the handset and the base unit

away from other electrical appliances
(p. 3).

•Move closer to the base unit.

•Raise the base unit antenna.

•Press 

Ü

to select a clearer channel in

the talk, speakerphone, intercom or
remote operation mode.

•The ringer volume is set to OFF. Set to

HIGH or LOW (p. 20).

•When the handset is on the base unit,

the handset does not ring. Only the base
unit rings in the selected pattern when
receiving a call. 

•Charge the battery fully (p. 14).

•You cannot store an item in the directory

while the unit is in the talk, speaker or
intercom mode, while the answering
system is in use or while storing phone
numbers in the base unit.

•Do not pause for over 60 seconds while

storing.

•To answer the call, press

, 

or

(SP-PHONE)

. 

Start again from the

beginning after hanging up.

•You cannot make a call when the unit is

in the remote operation mode. Exit the
mode by pressing 

(OFF)

(p. 72).