Sony KP 65WS500 User Manual

Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]

[4-088-847-12]

Use this hookup if:

❑

Your cable TV company scrambles some channels, but not all of them 
(pay channels vs. regular cable channels) and you need to use a cable 
box, and

❑

You want to enjoy the Twin View feature.

With this setup you can:

❑

Use the projection TV remote control to change channels on your cable 
box when the signal is scrambled. To program your Sony remote control 
to operate your cable box, see “Programming the Remote Control” on 
page 68.

❑

Use the projection TV remote control to change channels using your 
projection TV when the signal is not scrambled. Your projection TV’s 
tuner provides a better signal than the cable box.

❑

Use the Twin View feature. (When all channels are routed through your 
cable box, only one signal is sent to the projection TV, so you cannot 
use the Twin View feature.)

Connect the Cable TV cable to the projection TV’s VHF/UHF jack.

Using a coaxial cable, connect the TV’s TO CONVERTER jack to the 
cable box’s IN jack. The projection TV’s internal converter allows you 
to switch between unscrambled signals coming straight into the 
projection TV and scrambled signals coming in through the cable box, 
eliminating the need for an external splitter.

Using a coaxial cable, connect the cable box’s OUT jack to the VCR’s 
IN jack.

Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S 
VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN 
jacks.

Using a coaxial cable, connect the VCR’s OUT jack to the projection 
TV’s AUX jack.

✍

To view scrambled channels, set your projection TV to AUX 3 or 4 
(depending on your cable box output). Change channels using your 
cable box.

01COV.book  Page 20  Tuesday, July 30, 2002  3:46 PM