Dimplex Dimplex DFI2309 User Manual

19

7.  Either pinch the clasp to release or cut each of the four 

(4) mounting studs (one in each corner of the Log Driver 

Board) that attach the circuit board to the chassis of the 

firebox.

 NOTE: If mounting studs are cut, ensure they are 

replaced by those supplied with replacement board.

8.  Clear both ends of mounting studs if cut.
9.  Install replacement mounting studs (if necessary) by 

pushing them through the sheet metal from the outside of 

the firebox.

10. Properly orientate replacement Log Driver Board and 

push onto mounting studs until all four (4) snap closed.

10. Remove one wire terminal from original Log Driver Board 

and install onto replacement Log Driver Board, matching 

its original position.

11. Continue with remaining wire connections, moving one 

wire at a time, matching its original position.

 WARNING:  Improper re-connection of wiring may result 

in electric shock, fire, or injury to persons.  Ensure that 

connections to/from circuit board match those of the 

respective wiring diagram for the particular model and 

MOD level being serviced (pages 7-10).

12. Once all connections are made, follow steps 1 and 2 in 

reverse order to reassemble the firebox.

Log Driver 

Board