Kenwood TM-271E User Manual
53
10
A
DJUSTING
THE
P
AUSE
D
URATION
You can change the pause duration (a space digit)
stored in Memory Channels. The default setting is
500 milliseconds.
stored in Memory Channels. The default setting is
500 milliseconds.
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 31 (PA).
2 Press [MENU] and turn the Tuning control to select
100, 250, 500 (default), 750, 1000, 1500, or 2000 ms.
3 Press [MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
DTMF LOCK
You sometimes may want to disable the keypad to avoid
accidental DTMF transmission. In this case, turn the
DTMF Lock function ON.
accidental DTMF transmission. In this case, turn the
DTMF Lock function ON.
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 32 (DT.L).
2 Press [MENU] and turn the Tuning control to select
“ON” or “OFF” (default).
3 Press [MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
When this function is activated, you cannot send DTMF
tones using the Mic keypad. DTMF memory
transmission is also inhibited.
tones using the Mic keypad. DTMF memory
transmission is also inhibited.