Sony PFM-510A1WE Manual

7

 (GB)

1

Receives the beam from the Remote Commander.

2

 1 (standby) switch/1 (standby) indicator

Press to turn the monitor on. Press again to go back to
the standby mode.
The 1 (standby) indicator lights up in red in the
standby mode.

When the 1 indicator flashes, see “Self-diagnosis
Function” on page 26 (GB).

3

Lights up when the monitor is turned on.

4

To operate the buttons on the control panel, first press
this button. Then the buttons light up or flash that
show they can be operated. Press again to deactivate
them.

The buttons (except for 1 (standby) switch 2) on the
control panel do not function if you do not press the
CTRL button first.

5

Select the signal input from the Y/C IN jack in the
LINE connectors.

6

Select the signal input from the VIDEO IN connector
in the LINE connectors.

7

Select the signal input from the RGB2 connectors.

8

Select the component signal input from the RGB1
connectors.

9

Select the RGB signal input from the RGB1
connectors.

0

Press to select the desired item in a menu.

qa

M/m buttons

Press to move the cursor (B) to an item or to adjust
value in a menu.

qs

Press to make the menu appear.

qd

Press the + button to increase the volume, or the –
button to decrease the volume.

Location and Function of Parts and Controls

VOL –

VOL +

MENU

ENT

RGB1

YUV

RGB2

LINE

Y/C

CTRL

m

M

1

qd

qs

qa

0

9

8

7

6

5

4

3

2

1