Multi-Tech Systems MVP-2410 User Manual

35 

Attaching the MultiVOIP to a rack-rail of an EIA 19-inch rack enclosure 

will certainly require two persons.  Essentially, the technicians must 

attach the brackets to the MultiVOIP chassis with the screws provided, 

as shown in Figure 3-3, and then secure unit to rack rails by the 

brackets, as shown in Figure 3-4.  Because equipment racks vary, screws 

for rack-rail mounting are not provided.  Follow the instructions of the 

rack manufacturer and use screws that fit.  

1.  Position the right rack-mounting bracket on the MultiVOIP 

using the two vertical mounting screw holes. 

2.  Secure the bracket to the MultiVOIP using the two screws 

provided.  

3.  Position the left rack-mounting bracket on the MultiVOIP 

using the two vertical mounting screw holes. 

4.  Secure the bracket to the MultiVOIP using the two screws 

provided.  

5.  Remove feet (4) from the MultiVOIP unit. 
6.  Mount the MultiVOIP in the rack enclosure per the rack 

manufacture’s mounting procedure. 

x

x