Samsung SRP - 350 User Manual

Page of 35
[Appendix 3] Factory Reset 
 
1. 
Default setting after factory reset 
      - Activate DHCP mode 
      - Local Port: 9100 
      - Inactivity Time: 0 
      - Speed   
         
SRP-770II, SLP-T400: 230400 bps 
          SRP-270, SRP-275, SRP-350, SRP-350plus, SRP-370, SRP-372: 9600 bps 
 
2. How to rest 
 
    1) Turn off the printer 
    2) Turn on the printer while pressing Function Key   
        [Note]   
        Press Function key 3 more seconds after turning on the printer. 
 
3) Wait 10 seconds until new IP address is allocated to the printer. 
        - The IP address will be allocated automatically under DHCP mode. 
 
        [Note]
   
        - DHCP Network environment 
          Connect to web-server with newly allocated IP address. 
          Check new IP address by pressing Function key 
 
        - Static IP Network environment 
          The IP address will not be allocated automatically. 
          Set up Static IP with Configurator utility. 
 
    4) Print Network setting information by pressing Function key 
  - Connect web-server to change any network setting 
 
        [Note] 
        Check if the baud rate of the printer is set same as below. 
SRP-770II, SLP-T400: 230400 bps 
        SRP-270, SRP-275, SRP-350, SRP-350plus, SRP-370, SRP-372: 9600bps