Sony MVC-FDR1 User Manual
26
-EN
Changing the lithium battery
When the lithium battery becomes weak or dead, the “I” indicator flashes on the
screen. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025
lithium battery. Use of any other battery may present a risk of fire or explosion.
screen. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025
lithium battery. Use of any other battery may present a risk of fire or explosion.
When installing the lithium battery, keep the power source connected. Otherwise, you
will need to reset the date and time retained by the lithium battery.
will need to reset the date and time retained by the lithium battery.
(1) Slide the lid of the lithium battery compartment and open it.
(2) While pushing the lithium battery up, and pull it out from the holder.
(3) Install the lithium battery with the positive (+) side facing out.
(4) Close the lid.
(2) While pushing the lithium battery up, and pull it out from the holder.
(3) Install the lithium battery with the positive (+) side facing out.
(4) Close the lid.
(1)
(2)
(3)
(4)