Nortel Networks 4400 User Manual
Appendix B Installing System Software from the CD-ROM 69
Getting Started with Passport 4400, Release 4.1
CLI Procedure for Downloading Application Software
1
Load the Passport 4460 Release 4.1 software onto your TFTP server (boot and
application code as required).
application code as required).
2
Access the CLI (it may be necessary to do this through a Telnet session).
3
Download the boot code (if necessary). Otherwise, skip this step.
Example:
Download base image specific 192.168.15.30 “bt41xxxx.bld”. This will
download the file bt41xxxx.bld from the TFTP host with the IP address
192.168.15.30 (where x’s represent the current version/filename).
download the file bt41xxxx.bld from the TFTP host with the IP address
192.168.15.30 (where x’s represent the current version/filename).
4
Download the Release 4.1 application code onto the Passport 4460 unit using
TFTP.
TFTP.
a
Commit the application code bank that will be write-protected during the
download
download
Example:
CLI> set system firmware commitcodebank bank 1
This will write-protect application code bank 1. The application code will
be downloaded into bank 2.
be downloaded into bank 2.
b
Download the application code,
Example:
CLI> download base image specific 192.168.15.30 “pr41xxxx.bld”
This command downloads the file pr41xxxx.bld from the TFTP host
whose IP address is 192.168.15.30 (where x’s represent the current
version/filename).
whose IP address is 192.168.15.30 (where x’s represent the current
version/filename).
5
Commit the new application software to the write-protected bank.
Example:
CLI> set system firmware commitcodebank bank2