Paradyne CSU User Manual

Page of 470
7. Operation and Maintenance
9128-A2-GB20-80
September 2002
7-39
Table 7-13. DBM Interface Status (1 of 3) 
Field
Status
What It Indicates
Line Status 
The overall status of the ISDN line.
Active
„
The ISDN line is active and no 
error conditions exist.
Disabled
„
The ISDN interface has been 
disabled.
Main Menu
Configuration
ISDN
Physical
Inactive
„
The ISDN line is disconnected or 
an ISDN network alarm condition 
exists.
Invalid SPID
„
The switch has rejected one of 
the configured SPIDs 
(ISDN BRI DBM only). 
Invalid Local Number
„
The phone number configured for 
a B-channel is an invalid local 
number.
Call Rejected – Invalid 
ID: 
Caller ID
„
The incoming call was rejected 
because the Caller ID or local 
phone number received from the 
switch did not match any 
configured Link Profiles.
If provided by the switch, the 
rejected Caller ID is displayed 
after the status. Otherwise, 
Invalid Call ID
 is displayed.
Call Rejected – No 
Far-End ID
„
The incoming call was rejected 
because no Caller ID was 
received from the switch (COM 
port’s Port Use option is set to 
Caller ID).
„
No local phone number was 
received from the far-end device 
during the call validation process 
(COM port’s Port Use option is 
set to Proprietary).
Call Rejected – 
ISDN 
Link Name: Busy
„
The incoming call was rejected 
because the enabled ISDN Link 
Name associated with the 
incoming Caller1 ID or local 
phone number was busy.
The ISDN Link Name associated 
with the incoming call is 
displayed.
1
Only appears for a constituent frame relay link.
2
If Link Operating Mode is Disabled or Idle, the Remote Call ID, ISDN Channel, and 
Negotiated Rate fields will not appear.
3
Appears for frame relay links with only one constituent and for all constituent frame 
relay links.