Paradyne CSU User Manual

Page of 470
7. Operation and Maintenance
9128-A2-GB20-80
September 2002
7-55
For an IP Enabled DLCI, statistics are shown for last, minimum, average, and 
maximum round trips, and for dropped SLV responses, for each of the seven 
classes of service. 
Table 7-17. SLV Performance Statistics for IP Enabled DLCI  (1 of 2) 
Statistic
What It Indicates
Far End IP Addr
IP Address of the device at the other end of the DLCI 
connection.
None
 appears if the FrameSaver unit has not communicated 
with the other end, or if the device at the other end of the DLCI 
does not have an IP Address configured.
Path Up Time
The number of days, hours, minutes, and seconds since the last 
transition of this DLCI from Inactive to Active.
Far End Circuit
Number of the DLCI at the other end of the connection. 
None
 appears if the unit has not communicated with the other 
end.
SLM Poll Type
The role played by the far-end FrameSaver in the collection of 
latency and availability statistics.
Initiator – The far-end FrameSaver initiates the SLV packet 
used for statistics collection.
Responder – The far-end FrameSaver returns the SLV packet 
sent by the Initiator.
Far End Name
The system name configured for the far-end FrameSaver 
device, obtained using its IP address. 
Unknown
 appears if the 
far end device is not a FrameSaver or if no response has been 
received since the last reset.
COS Type 
Mismatches
The number of SLV packets received that indicate a mismatch 
between the Class of Service definitions in the near-end and 
far-end devices.
Far End Type
The model type of the far-end FrameSaver device, obtained 
using its IP address. 
Unknown
 appears if the far end device is 
not a FrameSaver or if no response has been received since the 
last reset.
COS Name
The names for different Classes of Service defined using the 
Class of Service Definitions screen. See 
COS ID
The ID numbers (1–7) of the Class of Service definitions.
Last RdTrip
Current round trip latency, measured in milliseconds, between 
the FrameSaver unit and the device at the other end of the DLCI 
connection. 
Unknown
 appears if communication with the far-end device is 
not successful.
Min RdTrip 
Minimum round trip latency measured over the last 15 samples 
between the FrameSaver unit and the device at the other end of 
the DLCI connection.
--
 appears if communication with the far-end device over the 
last 15 samples has not been successful.