Paradyne CSU User Manual
7. Operation and Maintenance
9128-A2-GB20-80
September 2002
7-79
Determining Whether a Download Is Completed
To see whether a download has completed, check the Identity screen.
Main Menu
→
Status
→
Identity
Check Alternate Software Rev. under the NAM Identity column.
If a software revision number appears, the file transfer is complete.
If
In Progress
appears, the file is still being transferred.
If
Invalid
appears, no download has occurred or the download was not
successful.
Changing Software
Once a software upgrade is downloaded, it needs to be activated. When activated,
the unit resets, then executes the downloaded software. With this feature, you
control when the upgrade software is implemented.
the unit resets, then executes the downloaded software. With this feature, you
control when the upgrade software is implemented.
Procedure
To switch to the new software:
1. Go to the Control menu, and select Select Software Release.
Main Menu
→
Control
→
Select Software Release
The currently loaded software version and the new release that was just
transferred are shown.
transferred are shown.
If the download failed,
Invalid
appears in the Alternate Release field
instead of the new release number. Repeat the procedure
Upgrading System
Software
if this occurs.
2. Select Switch&Reset.
3. Enter Yes to the
Are you sure?
prompt. The unit resets and begins
installing the newly transferred software.
4. Verify that the new software release was successfully installed as the Current
Software Revision.
Main Menu
→
Status
→
Identity
NOTE:
If someone opens a Telnet session and accesses the unit’s Identity screen
while the unit is downloading software, the
while the unit is downloading software, the
In Progress...
message
appears in the Alternate Software Revision field.
See
on page 7-3 to see what is included on the
unit’s Identity screen.