Paradyne CSU User Manual
8. Troubleshooting
8-24
September
2002
9128-A2-GB20-80
Send Pattern
This test sends packets filled with a hexadecimal 55 test pattern and sequence
number over the selected interface and DLCI to another FrameSaver device.
number over the selected interface and DLCI to another FrameSaver device.
To send a pattern test on a link:
Main Menu
→
Test
→
[Network PVC Tests/Data Port PVC Tests/
ISDN Call/PVC Tests]
If the CIR is zero, the pattern will be sent at a rate of 1000 bps.
Monitor Pattern
This test monitors packets filled with a hexadecimal 55 test pattern and sequence
number over the selected interface and DLCI to another FrameSaver device.
number over the selected interface and DLCI to another FrameSaver device.
To monitor a pattern test on a link:
Main Menu
→
Test
→
[Network PVC Tests/Data Port PVC Tests/
ISDN Call/PVC Tests]
The current number of sequence and data errors are shown under the Result
column when the
column when the
FrameSaver unit is in sync. An
Out of Sync
message appears
when 5 frames out of 25 are missing or out of sequence.
These error counts are updated every second. If the maximum count is reached,
99999+
appears in these fields.
If the selected DLCI is
configured as . . .
configured as . . .
Then . . .
And the default
Rate (Kbps) setting is . . .
Rate (Kbps) setting is . . .
Standard
(Disruptive)
appears
after Test
100% of CIR
Multiplexed
(Non-Disruptive)
appears after Test
10% of CIR