Paradyne CSU User Manual
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80
September 2002
B-9
Trap: warmStart
This trap indicates that the FrameSaver unit has been reset and has stabilized.
Trap: authenticationFailure
This trap indicates that access to the FrameSaver unit was unsuccessful due to
lack of authentication.
lack of authentication.
Table B-3.
warmStart Trap
Trap
What It Indicates
Possible Cause
warmStart
FrameSaver unit has just
reinitialized and stabilized itself.
reinitialized and stabilized itself.
Reset command sent.
Power disruption.
String:
‘Unit reset.’
‘Unit reset.’
Variable-Binding
devLastTrapString
(devHealthAndStatus. mib)
(devHealthAndStatus. mib)
Table B-4.
authenticationFailure Trap
Trap
What It Indicates
Possible Cause
authenticationFailure
Access to the FrameSaver
unit was attempted and
failed.
unit was attempted and
failed.
Bad password on COM port
terminal.
terminal.
String:
‘Unauthorized access
attempted from COM port.’
‘Unauthorized access
attempted from COM port.’
Bad password on modem port
terminal.
terminal.
String:
‘Unauthorized access
attempted from modem port.’
‘Unauthorized access
attempted from modem port.’
Bad password through telnet.
String:
‘Unauthorized access
attempted from telnet user at
$ipAddress.’
‘Unauthorized access
attempted from telnet user at
$ipAddress.’
SNMP bad community,
unauthorized IP address, or
unauthorized operation.
unauthorized IP address, or
unauthorized operation.
String:
‘Unauthorized access
attempted from SNMP user at
$ipAddress.’
‘Unauthorized access
attempted from SNMP user at
$ipAddress.’
authenticationFailure
Variable-Binding
An ISDN backup call has been
received, but the call was
rejected.
received, but the call was
rejected.
String:
‘Bad Caller ID $phone.’
($phone is either a phone
number or “no number.”)
‘Bad Caller ID $phone.’
($phone is either a phone
number or “no number.”)
devLastTrapString
(devHealthAndStatus.mib)
(devHealthAndStatus.mib)