Paradyne CSU User Manual

B. SNMP MIBs and Traps, and RMON Alarm Defaults

9128-A2-GB20-80

September 2002

enterpriseSecondary-
ClockFail(4)

„

devLastTrapString 
(devHealthAndStatus.- 
mib)

Operating software has detected 
that the secondary clock source 
has failed.

String: 
‘Secondary clock failed.’

enterpriseSecondary-
ClockFailClear(104)

Operating software has detected 
that the secondary clock source is 
operational again.

String: 
‘Secondary clock restored.’

enterpriseSelfTest-
Fail(2)

„

devLastTrapString 
(devHealthAndStatus.- 
mib)

Unit has completed 
(re)initialization and a hardware 
failure was detected.

String: 
‘Self test failed: $

s.’ ($s is the 

contents of devSelfTestResult.)

enterpriseTest-
Start(5)

For physical interfaces and 
frame relay links:

„

ifIndex (RFC 1573)

„

.0.0  (placeholder)

„

devLastTrapString 
(devHealthAndStatus.- 
mib

For virtual circuits (DLCIs):

„

devFrExtDlciIfIndex 
(devFrExt.mib)

„

devFrExtDlciDlci 
(devFrExt.mib)

„

devLastTrapString 
(devHealthAndStatus.- 
mib

At least one test has been started 
on an interface or virtual circuit.

String: 
‘$testString test started on 
$ifString.’ (e.g., ‘DTE Loopback 
test started on Sync Data Port 
S01P1.’)

enterpriseTest-
Stop(105)

All tests have been halted on an 
interface or virtual circuit.

String: 
‘$testString test stopped on 
$ifString.’ (e.g., ‘Disruptive PVC 
Loopback test stopped on DLCI 
100 of Sync Data Port S01P1 
frame relay.’)