Paradyne CSU User Manual
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80
September 2002
B-23
DLCI Alarm Defaults – NetScout Area
These alarms can be created during RMON initialization or when a DLCI is
created. They are put into the NetScout alarm area. Table B-11 identifies alarm
defaults that do not change, and
created. They are put into the NetScout alarm area. Table B-11 identifies alarm
defaults that do not change, and
identifies alarm defaults that change when the interface’s line
speed changes.
The thresholds for these alarms can be edited using NetScout Manager Plus so
they match the values in the SLA between the customer and service provider. Up
to eight alarms per interface are allowed. Any additional alarms are added to the
Paradyne Area alarms and they cannot be changed using NetScout software.
they match the values in the SLA between the customer and service provider. Up
to eight alarms per interface are allowed. Any additional alarms are added to the
Paradyne Area alarms and they cannot be changed using NetScout software.
See
.
Maximum
Latency
Latency
A
MIB: pdn_FrExt.mib (E)
Tag: devFrExtLatencyMax
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.3.1.I.D
6.9.4.3.1.I.D
60 secs
(1 min)
(1 min)
Rising
0
0
Table B-12. DLCI Alarm Defaults – Paradyne Area (2 of 2)
Item
Sample
Type
Type
1
MIB/Tag/OID
2
Interval
Event
Type
Type
Rising
Threshold
Default
Threshold
Default
Falling
Threshold
Default
Threshold
Default
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is
contained in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
contained in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2
I in the OID = Interface ID of the frame relay link.
D = DLCI number.
D = DLCI number.