Paradyne CSU User Manual
4. Configuration Options
9128-A2-GB20-80
September 2002
4-3
Using the Easy Install Feature
The Easy Install feature provides a straight-forward installation menu that requires
minimal configuration to get the FrameSaver unit up and running quickly, and to set
up remote configuration and management via Telnet access from the NOC
(Network Operations Center).
minimal configuration to get the FrameSaver unit up and running quickly, and to set
up remote configuration and management via Telnet access from the NOC
(Network Operations Center).
Main Menu
→
Easy Install
Easy Install Screen Example *
* The Ethernet Management Options Screen applies to the 9126-II (both CSU/DSU
and Router) and 9128-II. For the Model 9126, DS0 Base Rate (Kbps) appears after
the Network 1 Line Coding Format option.
the Network 1 Line Coding Format option.
To remotely access the FrameSaver unit in Frame Relay mode, use the Dedicated
Network Management Link that was created during installation, using the Node IP
Address that was entered for the unit.
Network Management Link that was created during installation, using the Node IP
Address that was entered for the unit.
See the
, the
, or the
for additional information and installation procedures.
main/easy_install 9128-II
Device Name: Node A 08/23/2002 11:04
EASY INSTALL
Service Type: Frame Relay
Node IP Address: 000.000.000.000 Clear
Node Subnet Mask: 000.000.000.000 Clear
TS Access: DLCI 980
Create a Dedicated Network Management Link
Ethernet Management Options Screen
Time Slot Assignment Screen
Network 1 Line Framing Format: ESF
Network 1 Line Build Out (LBO): 0.0
Network 1 Line Coding Format: B8ZS
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save