LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch User Manual
Trunk Setting
The Trunk function enables to cascade two devices with a
double times bandwidth (up to 1600Mbps in full duplex mode).
There are 4 selection for the trunk setting, port “09,10”, port
“09,10,11,12”, port “09,10,11,12,13,14,15,16” or select “disable”
for closing this function.
double times bandwidth (up to 1600Mbps in full duplex mode).
There are 4 selection for the trunk setting, port “09,10”, port
“09,10,11,12”, port “09,10,11,12,13,14,15,16” or select “disable”
for closing this function.
Figure 20. Trunk Settings
Be sure that the selected trunk setting port must connect to the
device with a same VLAN group.
device with a same VLAN group.
Mirror Setting
Port Mirroring is a method of monitoring network traffic that
forwards a copy of each incoming and/or outgoing packet from
one port of a network switch to another port where the packet
can be studied. It enables the manager to keep close track of
switch performance and alter it if necessary.
forwards a copy of each incoming and/or outgoing packet from
one port of a network switch to another port where the packet
can be studied. It enables the manager to keep close track of
switch performance and alter it if necessary.
Configuring the port mirroring by assigning a source port from
which to copy all packets and a sniffer port where those packets
will be sent.
which to copy all packets and a sniffer port where those packets
will be sent.
The selection of the sniffer mode is as follow:
TX (transmit) mode: this mode will duplicate the data transmit
from the source port and forward to the sniffer port.
from the source port and forward to the sniffer port.
28