LevelOne LevelOne 8+8 POE 10/100 Mbps Web Smart Switch User Manual
Figure 26.
Press “Refresh” button to refresh the status of the PoE.
Press click on the ID parameter to enter to the selected port to
configure the PoE settings, select enable to activate the PoE
function from port 1 to port 8, and disable to deactivate the PoE
function. Click “Apply” button to save the setting.
Press click on the ID parameter to enter to the selected port to
configure the PoE settings, select enable to activate the PoE
function from port 1 to port 8, and disable to deactivate the PoE
function. Click “Apply” button to save the setting.
Figure 27.
Device Status
Click on the “Status” to present the device status on this
screen, it will show the System Status, Port Status, VLAN
Status, Trunk Status, Mirror Status, QoS Status and PoE Status.
screen, it will show the System Status, Port Status, VLAN
Status, Trunk Status, Mirror Status, QoS Status and PoE Status.
Press “Refresh” when you need to renew the posted
information.
information.
31