Husqvarna 324L User Manual

20 – 

English

Always use HUSQVARNA filter oil, art. no. 531 00 92-48. The 
filter oil contains a solvent to make it spread evenly through 
the filter. You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it. 
Knead the plastic bag to distribute the oil. Squeeze the 
excess oil out of the filter inside the plastic bag and pour off 
the excess before fitting the filter to the machine. Never use 
common engine oil. This would drain through the filter quite 
quickly and collect in the bottom.

The bevel gear is filled with the right quantity of grease at the 
factory. However, before using the machine you should check 
that the bevel gear is filled three-quarters full with grease. Use 
HUSQVARNA special grease.

The grease in the bevel gear does not normally need to be 
changed except if repairs are carried out.

IMPORTANT! Use only HUSQVARNA replacement parts. 
Use of other brands of replacement parts can cause 
damage to your unit or injury to the operator or others. Your 
warranty does not cover damage or liability caused by the 
use of accessories and/or attachments not specifically 
recommended by HUSQVARNA.