Husqvarna 11 User Manual

Page of 52
40 
– English
Problem
Procedure
Engine will not start
Fuel tank empty
Plug defective
Plug connection defective
Dirt in carburettor or fuel pipe
Starter does not pull round engine
Battery flat
Bad contact between cable and battery terminal
Lift lever for cutting unit in wrong position
Main fuse blown. The fuse is placed in front of the
battery, under the battery cover.
Ignition lock faulty
Gear shift/hydrostat pedal not in neutral
Engine does not run smoothly
Wrong gear, too high
Carburettor incorrectly set
Air filter clogged
Fuel tank vent blocked
Ignition setting defective
Dirt in fuel pipe
Choke activated or throttle wire incorrectly adjusted
Engine seems to have no power
Air filter clogged
Plug defective
Dirt in carburettor or fuel pipe
Carburettor incorrectly set
Choke activated or throttle wire incorrectly adjusted
Engine overheats
Engine overloaded
Air intake or cooling flanges blocked
Fan damaged
Too little or no oil in engine
Ignition defective
Plug defective
Battery does not charge
One or more cells faulty
Bad contact between battery terminals and cables.
Machine vibrates
Blades are loose
Engine is loose
Imbalance on one or more blades, resulting from
damage or inferior balancing after sharpening
Uneven mowing
Blades blunt
Cutting unit skew
Long or wet grass
Grass blockage under hood
Different tyre pressures on right and left sides
Over-speeding
Drive belts slipping
The blade has a broken break-pin (BioClip)
TROUBLE SHOOTING SCHEDULE