Manualsbrain.com
  1. Manuals
  2. Brands
  3. Tascam
  4. DM-24
  5. User Manual

Tascam DM-24 User Manual

Download
Page of 146
17 – Specifications—Digital audio I/O
 TASCAM DM-24 Reference Manual
 125
Digital audio I/O
Miscellaneous I/O connections
DIGITAL INPUTS
 (
1
, 
2
)
2 x XLR-type female connectors (input impedance 110
Ω)
2 x RCA pin jacks (input impedance 75
Ω)
AES3-1992 or IEC60958 data format (automatically detected)
24-bit word length
Switchable sampling frequency conversion available
DIGITAL OUTPUTS
 (
1
, 
2
)
2 x XLR-type male connectors (output impedance 110
Ω
2 x RCA pin jacks (output impedance 75
Ω)
AES3-1992 or IEC60958 data format (software selectable)
24-bit word length
TDIF-1
(
1
, 
2
, 
3
)
3 x 25-pin D-sub connectors (metric lock screws)
Conform to TDIF-1 standard 
24-bit word length
ADAT IN
/
OUT
2 x “Lightpipe” optical connectors 
Conform to ADAT OPTICAL specifications
24-bit word length
Sampling frequencies
Internal 44.1kHz/48kHz, 88.2kHz/96kHz (high sampling frequencies)
External ±6.0% 
WORD SYNC IN
BNC connector
Switchable 75
Ω termination
TTL level
WORD SYNC OUT/THRU
BNC connector
Switchable between through and output
TTL level
MIDI IN
, 
OUT,
 
THRU/MTC OUT
3 x 5-pin DIN connectors—conform to MIDI specifications 
TIME CODE IN
RCA pin jack
Conforms to SMPTE specifications
DTRS REMOTE OUT
15-pin D-sub male (metric lock screws)
Conforms to DTRS SYNC standard
EXT SW
1/4” mono jack
TO METER
25-pin D-sub connector (non-metric lock screws) 
For use with the optional MU-24/DM
RS-422 (for Sony 9-pin)
9-pin female D-sub connector (non-metric lock screws) 
wired to RS-422 standards
GPI (for Machine start)
9-pin female D-sub connector (non-metric lock screws) wired for GPI control
Pin 1=GPI1, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GPI5, Pin 6=GPI6, 
Pin 7=GPI7, Pin 8=GPI8, Pin 9=ground