Tascam DM-24 User Manual

7 – Module operations—UTILITY copying

TASCAM DM-24 Reference Manual

UTILITY copying

This screen allows the aux send levels and pan set-
tings for a group of channels to be set up to mirror
the settings made on the channel faders, and the other
way around. This may be useful when setting up a
studio monitor mix, for example, and the levels and
pans of the aux sends used for the monitor mix
should initially be set to the same as the channels.

The screen above allows these copies to be made
from one screen.

With the

SHIFT

indicator lit, press the

UTILITY

key.

There is only one screen, as shown here.

Check either of the two checkboxes (

PAN/BAL

and/or

LEVEL

) to select the settings to be cop-

ied.

In either of the two boxes, select either the

AUX -> CH

or the

CH -> AUX

setting radio but-

ton.

Naturally, it is not possible to select both in
the same box, though it is possible to select

CH -> AUX

in one box and

AUX -> CH

in the

other.

Select the source and the destination parame-
ters as explained here.

For pan/balance settings, aux sends must be linked to
be used as either sources or destinations. It is not pos-
sible to select individual aux sends here.

The aux sends are selectable individually or as linked
pairs as sources or destinations for level copying.

Channels are divided into blocks of eight:

1-8

9-16

17-24

25-32

and

ALL

. Individual channels cannot be

selected.

Move the cursor to the on-screen

COPY

button

and press

ENTER

. A confirmation popup

message appears.

Press

ENTER

again to confirm the copy, or a

cursor key to cancel.

If neither of the checkboxes is checked when you
press the

COPY

button, an error message is displayed.