Tascam DM-24 User Manual
11 – Machine Control/Location—MIDI controllers
TASCAM DM-24 Reference Manual
93
MIDI controllers
The PODs of the DM-24 can be used to send MIDI
Control Change messages as described here.
Control Change messages as described here.
The most common controllers are listed here, and the
cursor keys and PODs are used to set the values of
these controllers on the selected channel.
cursor keys and PODs are used to set the values of
these controllers on the selected channel.
The selected channel is shown at the top of the
screen, and is the same as the ID selected on the
setup page.
screen, and is the same as the ID selected on the
setup page.
Control Functions available in this screen are:
MIDI faders
In the MIDI faders screen, the master layer of the
DM-24 faders is used to control MIDI Control
Change values, on the same controller, for all sixteen
MIDI channels:
DM-24 faders is used to control MIDI Control
Change values, on the same controller, for all sixteen
MIDI channels:
The MIDI Control Change number can be selected
and set in this screen. As the example here shows,
this may be used most often with MIDI volume
(Control Change 7) in order to provide an easy way
of independently controlling the volume of up to 16
MIDI devices connected to the DM-24.
and set in this screen. As the example here shows,
this may be used most often with MIDI volume
(Control Change 7) in order to provide an easy way
of independently controlling the volume of up to 16
MIDI devices connected to the DM-24.
No.
Control Function
No.
Control Function
01
Modulation
64
Sustain
02
Breath
67
Soft
04
Foot
16
Gpc1
11
Expression
17
Gpc2
18
Gpc3
07
Ch.vol
19
Gpc4
08
Balance
5
Porto Time
10
Pan
84
Porto Ctrl
12
Eff Ctrl
99
Non Reg
13
Eff Ctrl
101
Reg