Panasonic KX-TD7694 User Guide

6

Document Version 2007-06  

You can attach the handset to your belt by following the steps below.

1. Install the two included screws in the wall, spacing them 24.5 mm (1 in) 

apart.

2. Mount the charger securely on the wall.

•

Make sure that the wall that the charger will be attached to is strong enough to sup-
port the weight of the handset and charger (240 g [0.53 lb]). If not, it is necessary for 

the wall to be reinforced.

•

When this product is no longer in use, make sure to detach it from the wall.

24.5 mm

(1 in)

for charger

Washer

Drive the screw 
to this point.

Screws

24.5 mm

(1 in)

Allows phone straps and sim-

ilar objects to be connected.

Insert the clip into the designated notches in the 

handset.

Remove the belt clip.