Panasonic HDC-TM80 User Guide
48
VQT3J26
In motion picture recording mode, you can further improve optical image stabilization
by touching and holding optical image stabilizer lock icon. With this function, you can
further reduce the effects of the shake that tends to occur when using zoom.
by touching and holding optical image stabilizer lock icon. With this function, you can
further reduce the effects of the shake that tends to occur when using zoom.
A Optical image stabilizer lock icon
1
Press the optical image stabilizer button to turn the image stabilizer on.
2
Touch and hold
.
≥
is displayed while you are touching the icon.
≥ Optical image stabilizer lock is released when you remove your finger from the icon.
∫ To set the display method of the optical image stabilizer lock icon
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release optical image stabilizer lock.
≥ To record while moving the unit quickly, release optical image stabilizer lock.
It is possible to focus and record a still picture of a subject that is touched.
1
Touch
.
2
Touch the subject.
≥ Focus area is displayed at the touched position, and a still
picture is recorded.
≥ Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
Optical image stabilizer lock
: [RECORD SETUP]
# [O.I.S. LOCK DISPLAY] # desired setting
[OFF]:
If no operation is performed for approx. 5 seconds, the icon disappears.
[ON]:
Constantly display.
Touch shutter
MENU
HDCSD80&TM80&HS80EB-VQT3J26_mst.book 48 ページ ２０１１年１月１１日 火曜日 午前１１時４４分