Panasonic HDC-TM80 User Guide

VQT3J26

Motion pictures or still pictures recorded with this unit can be copied between an SD card 
inserted in this unit and a built-in memory/HDD.

∫ Check the used space of the copy destination 

It is possible to check the used space of the SD card, built-in memory or HDD by [MEDIA 
STATUS] (l 42).
≥ By displaying in 1 scene or pressing and holding the thumbnail in the 20 scenes or 

9 scenes display, recording date and time are displayed when playing back motion 
pictures, and recording date and file number when playing back still pictures.

≥ Depending on the media condition, some remaining capacity of the SD card, built-in 

memory or HDD may not be used.

≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD 

cards following the instruction on the screen. In this case, the last scene copied to an SD 
card is automatically divided to fit the space on the SD card.

≥ If you divide the scenes (

l 83), and copy by scene selection, it is possible to copy 

matching the remaining capacity of the media, or only the necessary parts.

≥ If there is not much remaining capacity in the SD card, a confirmation message asking to 

copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot 
be restored.

≥ Refer to page 96 for approximate time for copying.

≥ Use a sufficiently charged battery or the AC adaptor.

≥ When there are relay recorded scenes in the built-in memory, a message appears on the 

screen. Touch [YES] and copy after combining relay recorded scenes to the SD card. 
(l 87)

Copy/Dubbing

When copying from the built-in memory to the SD card

When copying from the SD card to the built-in memory

[

]

When copying from the HDD to the SD card

[

]

When copying from the SD card to the HDD

HDCSD80&TM80&HS80EB-VQT3J26_mst.book  95 ページ  ２０１１年１月１１日　火曜日　午前１１時４４分