Panasonic AG-HMC40 User Guide

Displays

A
ALL DATA WILL BE DELETED.

FORMAT THE CARD NOW?

Do you wish to format the SD Memory Card

now? Yes/No

C
CANNOT BE USED DUE TO

INCOMPATIBLE DATA.

No use is possible because the standard for the

data is different.

CANNOT DELETE WITH THIS BUTTON

Clip cannot be deleted.

CANNOT DELETE.

Clip cannot be deleted.

CANNOT PLAY WITH THIS BUTTON

No playback is possible.

CANNOT PLAY.

No playback is possible.

CANNOT RECORD PH MODE AND

HA MODE INTO THIS CARD.

This card cannot be recorded to in PH mode or

HA mode.

CANNOT SET PRE-REC,

CARD CAPACITY TOO LOW.

PRE-REC cannot be set as the remaining card

capacity is low.

CANNOT SET

THE NUMBER OF INDEXES HAS

EXCEEDED THE MAXIMUM LIMIT.

No further indexes can be set because the

number of indexes will exceed the maximum
limit.

CARD DOOR OPENED.

Close the card door.

CARD ERROR.

PLEASE REFORMAT.

Formatting has failed. The card needs to be

reformatted.

■

CARD FULL.

The card is full.

CARD LOCKED.

Unlock the card.

CHECK CARD.

Please check the card.

CONTROL DATA ERROR

HAS BEEN DETECTED.

An error has been detected in the control

information.

D
DISCONNECT USB CABLE.

The camera cannot be operated while connected

via USB cable.

DISCONNECT USB CABLE.

When switching from one mode to another,

disconnect the USB connection cable.

I
INCOMPATIBLE CARD.

PLEASE CHECK CARD.

Recording may not be successful with this card.

Please check the card.

N
NO CARD

No card is inserted.

NOW ACCESSING.

PLEASE DO NOT REMOVE

CARD.

Card is currently being accessed. Please do not

remove the card.

■

Main warning displays

The main warning displays appearing on the LCD monitor or viewfinder are listed below. If a warning
display is not listed, check carefully the message displayed.

(Continued on the next page)