Panasonic DMC-LS5 User Guide

- 12 -

VQT3T39

(flashes red)

If the battery mark flashes red, replace the batteries with new ones.

Estimated remaining pictures or recording time capacity (press   to 

display on/off)

Displayed when no card is inserted (pictures will be saved to built-in memory)

 (Card) or 

 (Built-in memory) are illuminated red.

While the light remains lit, an operation is taking place, such as picture writing, reading, 
deletion or formatting. While the light is lit, do not turn off the power or remove battery, 
card, as this can cause data loss or damage.
Keep the camera away from vibrations, impact, or static electricity. Should any of these 
cause camera operation to be terminated, attempt to perform the operation again.

Pictures will be saved to a card if one is inserted, or to the built-in memory 

 if not.

■

●

 

●

The access time for the built-in memory may be longer than the access time for a card.

 

●

[QVGA] in [Rec Quality] can only be available to record motion pictures in the built-in 
memory.

■

Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)

SD Memory Cards

8 MB – 2 GB

 

• Can be used with devices compatible with the 

respective formats.

 

• Before using SDXC Memory Cards, check that 

your computer and other devices support this type 

of card. 

http://panasonic.net/avc/sdcard/information/SDXC.html

 

• Only the cards listed on the left with the given 

capacities are supported.

 

• Using a card of SD Speed “Class 6”

∗

 or above is 

recommended for recording motion pictures.

SDHC Memory Cards

4 GB – 32 GB

SDXC Memory Cards

48 GB, 64 GB

∗

  SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by 

checking the card label or other card related materials.

(Example)