Invicta 6933 User Guide

WATCHES WITH

ALARM

Setting the Date . Quick Mode

1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until you reach the correct date. If you are setting the

date between 9pm and 12pm, the date must be set to the following

day as dates set between these hours do not automatically change at

midnight.

3. Push the crown back into position 0. The display changes from refer-

ence to alarm time.

! PLEASE NOTE . Setting the date too quickly in quick mode can result in

the incorrect date being displayed. Switching the date between 01 and

31 restores the synchronization.

WATCHES WITH

ALARM

Setting the Alarm

1. Press the push-button for at least 2 seconds. Until the small minute

hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:

The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:

The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:

The reference time is moved forward until the push-button is released.

2. Switch alarm ON/OFF: Press the push-button briefly.

2 beeps: Alarm switched ON

1 beep: Alarm switched OFF