Invicta 6933 User Guide

IMPORTANT THINGS TO KNOW

Screw Down Crowns: Many Invicta watches are equipped with a screw

down crown to help prevent water infiltration. This is most common on our

Diver models. In order to adjust the date and/or time on such a watch,

you must first unscrew the crown before you can gently pull it out to its

first or second click stop position (page 3). To do this, simply rotate the

crown counterclockwise until it springs open. When you have finished

setting the watch, the crown must then be pushed in and screwed back

in tightly. Not doing so will cancel the water resistance of the watch

and will void all warranties from the manufacturer. Overall, this process

should not require a lot of effort or force.
Tritnite® Luminous Markers: Tritnite® is an environmentally friendly

luminous material used exclusively by Invicta. Tritnite® requires 4 –5 hours

of exposure to light for it to glow brightly in the dark. It will continue to

perform with regular exposure to light.

THANK YOU FOR CHOOSING AN INVICTA TIMEPIECE

Long ago, we set out to continue Invicta’s original 1837 mission – to offer

magnificent Swiss timepieces at modest prices. In doing so, we gave birth

to a movement in the watch industry that is turning the balance of power

over to the consumer.

We hope you enjoy your new timepiece and carefully read the easy-to-use

instructions pertaining to it. By doing so, you will help give it a long life and

keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain

the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified

watchmaker to ensure the gaskets are in proper condition. This will help to

assure the precise operation and longevity of the piece. Please refer to our

Service Center information on our web site www.invictawatch.com.