Sony KDL-32S2530 User Guide

 GB

KDL-46/40/32/26S2000

2-670-908-

(1)

No sound, but good picture

• Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Set-up” menu (page 26).

Noisy sound

• See the “Picture noise” causes/remedies on page 38.

The desired channel cannot be 
selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View 

service.

• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.

Digital channel is not displayed

• Contact a local installer to find out if digital transmissions are provided in 

your area.

• Upgrade to a higher gain aerial.

The TV turns off automatically 
(the TV enters standby mode)

• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of 

“On Timer” (page 25).

• If no signal is received and no operation is performed in the TV mode for 

10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically

• Check if the “On Timer” is activated (page 26).

Some input sources cannot be 
selected

• Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input 

source (page 25).

The remote does not function

• Replace the batteries.

010COV.book  Page 39  Monday, November 13, 2006  12:33 PM