Grizzly G1006 User Guide

g1006/7 heavy duty Mill/drill

-15-

the unpainted surfaces are coated with a waxy

oil to prevent corrosion during shipment. remove

this protective coating with a solvent cleaner

or degreaser shown in figure 5. For thorough

cleaning, some parts must be removed. for opti-

mum performance from your machine, clean

all moving parts or sliding contact surfaces.

avoid chlorine-based solvents, such as acetone

or brake parts cleaner that may damage painted

surfaces. always follow the manufacturer’s instruc-

tions when using any type of cleaning product.

clean up

gasoline and petroleum

products have low flash

points and can explode

or cause fire if used to

clean machinery. do

not use these products

to clean the machinery.

many cleaning solvents

are toxic if inhaled.

minimize your risk by only

using these products in a

well ventilated area.

g2544—solvent cleaner & degreaser

a great product for removing the waxy shipping

grease from your machine during clean up.

figure 5.

Cleaner/degreaser available from

grizzly.

in addition to the parts shown in figure 3, the

Model g1007 comes with the power feed and its

attachment accessories.

power feed (g1007 only) (figure 4)

Qty

Cap screws ¼-20 x 1-½ (end stops) ......... 2

Flat Washers ¼" (end stops) ..................... 2

end stops ................................................... 2

end stop Clamp plates .............................. 2

hex Bolts M8-1.25 x 25 (power Feed) ....... 2

lock Washers 8mm (power Feed) ............. 2

Flange Bushings 8mm (power Feed) ......... 2

powerfeed Mounting Bracket ..................... 1

hex Bolts w/tapered tip M8-1.25 x 25

(power Feed) .............................................. 2

gear Cover ................................................. 1

limit switch plate ....................................... 1

Cap screws M8-1.25 x 12 (stop Bracket) .. 4

Flat Washers 8mm (stop Bracket) ............. 2

powerfeed unit (not shown) ...................... 1

note: If you can't find an item on these lists, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.

if any nonproprietary parts are missing (e.g. a

nut or a washer), we will gladly replace them; or

for the sake of expediency, replacements can be

obtained at your local hardware store.

figure 4.

g1007 power feed inventory.

M n

o p Q