Digital Spectrum MF-8000 Network Guide
Gather information about
your Wireless Network
your Wireless Network
Click configure to Specify your
Wireless WEP key. Click on
“OK” then “Finish” when done.
You should now be able to send
slideshows wirelessly to the
Memoryframe.
1
SSID:
This is the name of your wireless network. See
your wireless routers documentation for the default setting.
WEP:
A WEP Key is a password required to access your
Wireless Network. If your router does not have WEP
security enabled, this option does not need to be configured
on the MemoryFrame.
Use Digital PixMaster to configure
your Wireless MemoryFrame
your Wireless MemoryFrame
3
If wireless security is enabled select
"WEP"
. Otherwise leave the
selection at none.
Wire le ss Ne tworking G uide
Open PixMaster
Select Digital Frame
(from the file menu)
Select Properties
Plug a compatible USB wireless adapter into the
MemoryFrame. Make sure the USB cable is
connected from the MemoryFrame to the PC.
Restart your MemoryFrame.
2
Let's Go Wireless
USB to Everything!
It’s easy to transfer
pictures from a
digit al camera
pictures from a
digit al camera
,
play
or transfer from card
readers and thumb drives.
Just plug in the device,
press the menu button on
the MemoryFrame and
select “Import/Play from
USB port.” You can then
select the desired action.
Card Reader
Wireless Adapter
USB Thumb Drive
Digital Camera
1.
Main Menu
<=Rev >=Fwd Select=Enter Menu=Exit
R e s u m e s l i d e s h o w
C o n f i g u r e s l i d e s
I m p o r t / p l a y f r o m U S B p o r t
D e l e t e a l l s l i d e s f r o m M e m o r y
P r e f e r e n c e s
2.
<=Rev >=Fwd Select=Enter Menu=Exit
P l a y s l i d e s h o w
F i l l M e m o r y W i t h I m a g e s
R e p l a c e M e m o r y W i t h I m a g e s
I m p o r t I n d i v i d u a l I m a g e s
P l a y I m a g e s F r o m U S B P o r t
E x i t T h i s M e n u
Main Menu
3.
Menu B utton
Select your Digital Frame
Click Configure
Select "Set Wireless Info"
Enter your SSID (wireless
network name)
Connect USB cable
USB wireless
adapter
Introduction
Wireless Networking allows you to send photo slideshows
created in PixMaster directly to your MemoryFrame without
using a USB cable.
The PixMaster software should already be installed.
The MemoryFrame USB driver should already be
inst alled.
inst alled.
The MemoryFrame should be connected to the PC using
the USB cable.
the USB cable.
The USB Wireless dongle should be inserted into the
MemoryFrame “Camera” USB socket.
MemoryFrame “Camera” USB socket.
Before continuing:
Make sure the USB cable is
connected from the
MemoryFrame to the PC.
Digital frame
My Network
My Network