Edimax EW-7128g User Manual
73
Wireless
Wireless protection will prevent data collision
when
when
Protection
there are both 802.11b and 802.11g clients. You
can select ‘Auto’ to let configuration utility to
decide to use wireless protection or not. You
can also select ‘ON’ or ‘OFF’ to force the use of
wireless protection or not.
can select ‘Auto’ to let configuration utility to
decide to use wireless protection or not. You
can also select ‘ON’ or ‘OFF’ to force the use of
wireless protection or not.
Beacon(ms)
You can define the time interval that a beacon
signal should be send. Default value is 100. Do
not modify this value unless you know what will
be affected.
signal should be send. Default value is 100. Do
not modify this value unless you know what will
be affected.
Idle Time
Select the idle time of your wireless network
card. Default value is 300. Do not modify this
value unless you know what will be affected.
card. Default value is 300. Do not modify this
value unless you know what will be affected.
No forwarding
Check this box and wireless clients will not be
able
able
among wireless
to share data with each other.
clients
Hide SSID
Hide SSID
Check this box and the SSID will not be
broadcasted to the public. Your wireless clients
must know the exact SSID to be able to connect
to your computer.
This option is useful to enhance security level.
broadcasted to the public. Your wireless clients
must know the exact SSID to be able to connect
to your computer.
This option is useful to enhance security level.
Allow BW
Check this box to allow BW 40MHz capability.
40 MHz
Default
Click this button to restore all settings in this
page back to default value.
page back to default value.
Apply
Click this button to activate current settings.
To exit, click ‘X’ button at the upper-right corner of configuration
window.
window.