Philips WACS700 Software Guide
4. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW
disc, using the following settings:
•
File System CD-ROM Joliet
•
File name length : max 31 chars (ISO Level 2)
•
Mode : 2/XA
•
Character set : ASCII
•
Single session
•
Write Speed : Low
•
Finalized the disc. (The application may do this automatically.)
(Note:
Make sure you finalize the CD)
ii) Upgrade WACS700
Upgrade WAC700 Center:
1. Check WAC700 Center is on and WAS700 Station is off
2. On Center, insert the upgrading CD into the CD slot loader, with
CD graphic printed side facing you