DELL 4200 Installation Guide
12
Rack Installation Guide
DELL CONFIDENTIAL - Preliminary 9/8/00
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
3.
Install three shoulder screws on each side of the computer (see Figure 9).
Install the shoulder screws in the three holes that are closest to the center of the
chassis side.
chassis side.
Figure 9. Installing the Rack Adapter and Shoulder Screws
4.
Install the two rack adapters on the computer (see Figure 9).
Secure a rack adapter to each side of the computer with two 10-32 x 0.25-inch
pan-head Phillips screws.
pan-head Phillips screws.
5.
Repeat steps 3 and 4 to install the shoulder screws and rack adapters on the
opposite side of the computer.
opposite side of the computer.
Installing the System in the Rack
CAUTION: If you are installing more than one computer, install the first
computer in the lowest available position in the rack.
computer in the lowest available position in the rack.
CAUTION: Never pull more than one component out of the rack at a time.
1.
Pull the two interior slide assemblies out of the rack until they lock in the
extended position.
extended position.
CAUTION: Because of the size and weight of the computer, never attempt to
install the computer in the slide assemblies by yourself.
install the computer in the slide assemblies by yourself.
rack adapters (2)
shoulder
screws (3 each
side)
screws (3 each
side)
10-32 x 0.25-inch pan-
head Phillips screws
(2 each rack adapter)
head Phillips screws
(2 each rack adapter)