Manualsbrain.com
  1. Manuals
  2. Brands
  3. ZyXEL
  4. P-660HW-D1
  5. User Guide

ZyXEL P-660HW-D1 User Guide

Download
Page of 460
Prestige 660H/HW Series User’s Guide
65 
Chapter 3 Wizard Setup for Internet Access
The following table describes the fields in this screen.
Table 9   Internet Access Wizard Setup: LAN Configuration 
LABEL
DESCRIPTION
LAN IP Address
Enter the IP address of your Prestige in dotted decimal notation, for example, 
192.168.1.1 (factory default). 
If you changed the Prestige's LAN IP address, you must use the new IP 
address if you want to access the web configurator again.
LAN Subnet Mask
Enter a subnet mask in dotted decimal notation.
DHCP
DHCP Server
From the DHCP Server drop-down list box, select On to allow your Prestige to 
assign IP addresses, an IP default gateway and DNS servers to computer 
systems that support the DHCP client. Select Off to disable DHCP server. 
When DHCP server is used, set the following items:
Client IP Pool Starting 
Address
This field specifies the first of the contiguous addresses in the IP address 
pool.
Size of Client IP Pool
This field specifies the size or count of the IP address pool.
Primary DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to 
the DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server As above.
Back
Click Back to go back to the previous screen.
Finish
Click Finish to save the settings and proceed to the next wizard screen.
4 The Prestige automatically tests the connection to the computer(s) connected to the LAN 
ports. To test the connection from the Prestige to the ISP, click Start Diagnose. 
Otherwise click Return to Main Menu to go back to the Site Map screen. 
Figure 16   Internet Access Wizard Setup: Connection Tests
5 Launch your web browser and navigate to 
www.zyxel.com
. Internet access is just the 
beginning. Refer to the rest of this guide for more detailed information on the complete 
range of Prestige features. If you cannot access the Internet, open the web configurator 
again to confirm that the Internet settings you configured in the Wizard Setup are correct.