Enterasys 6000 User Guide
1-20
FRX/FRM 3. 3 User G uide, Rev 04
Stopping Operation
Logging Out
If you have been working with menu operations and wish to log out, press
[F4]
at the
Main Menu. The Port Status Display screen is displayed, with any updates. The
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
[F1]
and enter the password to get back into
the Main Menu.
Rebooting
To reboot from within the menu level, press
[F10]
. When asked:
Reboot?
, press
[Y]
.
You cannot reboot the device from the initial Port Status Display. You must
first press
first press
[F1]
and enter the password to get to the Main Menu.
Rebooting the node clears all connections. If you do not want to
do this, simply press
do this, simply press
[F4]
to log out, then leave the device running.
Locally, a Frame Relay Module can be rebooted via the recessed Reset button located
near the top of the module.
near the top of the module.
Shutting Down
To shut down an FRX4000 or FRX6000, simply switch it off.
Make sure all users of the node are aware that it will be shut
down.
down.
A Frame Relay Module cannot be shut down without powering down the MMAC-
PLUS chassis; however, the FRM can be unplugged and removed without disrupting
operation of the MMAC-PLUS or the other modules in the MMAC-PLUS.
PLUS chassis; however, the FRM can be unplugged and removed without disrupting
operation of the MMAC-PLUS or the other modules in the MMAC-PLUS.