Qsc pl218 User Guide

The amplifier features a DataPort
(page 8, item #1) which connects to
accessory products to enhance your
amplifier application. The CM16a
Amplifier Network Monitor can
remotely control and monitor your
PL2 amplifier. Other QSC accessories
connect via the HD-15 DataPort
connector.

Accessories for the PL2 amplifiers
include crossover, filter and DSP
modules that mount directly to the
rear panel of the amplifier.

These accessories include the XC-3,
a 2-way crossover; the SF-3
Subwoofer Filter; and the LF-3 Low-
Frequency filter. You can use these
accessories to create 2-way, 3-way,
and 4-way (3-way plus subwoofer)
active systems.

For accessory information, contact
QSC's Technical Services
Department or your QSC
representative.

The correct AC line voltage is shown
on the serial number label (page 8,
item #11). Connecting to the wrong
line voltage is dangerous and may
damage the amplifier. The power
cord attaches to the IEC connector
on the rear panel (page 8, item #12).
Use the cord supplied with the
amplifier, or an equivalent. Insure
that the wire gauge of the cord is
#14AWG. Use of smaller wire
gauges can reduce the line voltage
available to the amplifier. A power
cord retaining clip (page 8, item
#12a) is provided with the amplifier.
We recommend you install and use
the retaining clip to prevent
accidental power cord disconnection.