Toshiba A8-EZ8511 Reference Guide
29
Adding memory (optional)
5.375 x 8.375 ver 3.1
(Sample Illustration) Inserting the memory module into the slot
14 Replace the memory module slot cover and secure it using the
screw.
15 Re-insert the main battery. For information on inserting the
main battery, see “Inserting a charged battery” on page 41.
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
installed for the computer to work.
Removing a memory module
If you need to remove a memory module:
1
Complete steps 1–8 in “Adding memory (optional)” on page 25
to shut down the computer and open the memory module slot
cover.
to shut down the computer and open the memory module slot
cover.
Do not try to remove a memory module with the computer turned
on. You can damage the computer and the memory module.
on. You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep
or Hibernation mode. The computer could hang up the next time
you turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
or Hibernation mode. The computer could hang up the next time
you turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
Front of
computer
computer
Memory slots
GMA500387010.book Page 29 Thursday, December 28, 2006 12:48 PM