Toshiba P505D-S8935 Reference Guide
44
Using the optical drive
5.375 x 8.375 ver 3.1
Inserting an optical disc (tray-type drive)
(Available on certain models)
Before putting on headphones to listen, turn the volume down. Do
not set the volume too high when using the headphones. Continuous
exposure to loud sound can harm your hearing.
not set the volume too high when using the headphones. Continuous
exposure to loud sound can harm your hearing.
To insert an optical disc into the drive:
1
Make sure the computer is turned on.
The drive will not open if the computer’s power is off.
2
Make sure the drive’s in-use indicator light is off.
3
Press the drive’s eject button.
The disc tray slides partially out of the drive (about 1 inch).
4
Grasp the tray and pull it fully open.
5
Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it.
6
Place the disc carefully in the disc tray, label side up.
(Sample Illustration) Positioning the disc in the drive
7
Gently press the disc onto the center spindle until it clicks into
place.
place.
Handle DVDs and CDs carefully, making contact only with the center
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
8
Make sure the disc is completely on the spindle and is lying flat
on the tray.
on the tray.