Toshiba L505D-GS6000 User Guide

60

Replace the memory module slot cover and secure it using the 
screw.

Re-insert the main battery. For more information on inserting 
the main battery, see 

.

Turn the computer right side up. Make sure to remove the soft 
cloth from the work surface before restarting the computer. 

Always make sure your computer and AC adaptor have adequate 
ventilation and are protected from overheating when the power is turned 
on or when an AC adaptor is connected to a power outlet (even if your 
computer is in Sleep mode). In this condition, observe the following:

 ❖

Never cover your computer or AC adaptor with any object.

 ❖

Never place your computer or AC adaptor near a heat source, 
such as an electric blanket or heater.

 ❖

Never cover or block the air vents including those located at the 
base of the computer.

 ❖

Always operate your computer on a hard flat surface. Using your 
computer on a carpet or other soft material can block the vents 
located at the base of the computer.

Overheating your computer or AC adaptor could cause system 
failure, computer or AC adaptor damage or a fire, possibly resulting 
in serious injury.

Reconnect the cables.

Restart the computer.

TECHNICAL NOTE: You must have at least one memory module 
installed for the computer to work.

When you add or remove a memory module, you can check that the 
computer has recognized the change. To do this:

❖

Click Start, Control Panel, System and Security, and then 
System.

The System window appears. Installed memory (RAM) is 
displayed below the System heading.

If the computer does not recognize the memory configuration, turn 
off the computer and remove the memory module slot cover 
(complete steps 

 in 

),